CB Radio Power Wiring

If you are new to modifying the electrical system of your vehicle, you must learn about the proper CB radio power wiring. A CB radio comes with an unprocessed power line that consists of a hot and ground wire. Getting power to a CB radio can be tricky, but there are many options, depending on your experience and your electrical skills. For example, you can tap into an existing power line.

cb radio power wiring

To get a radio connected to your car battery, you need to run a coaxial cable from your antenna to the CB. You must also connect the radio to a source of power. The type of power supply you choose should depend on the type of vehicle you drive. You may have to route the cable through the trunk, under the dashboard, or under the window pillar. You can either use your car battery or a cigarette plug to provide the necessary power to your CB.

If you are rewiring your car’s electrical system, you will need to place the CB radio power cable before the chassis and firewall of the vehicle. This is because a cigarette plug can drain the battery very quickly. If you are connecting your cigarette plug to the battery, you must connect the black and red wires first. The red wire should connect to the positive side of the battery while the black wire should be connected to the negative side of the car.